« previous next »
Pages: [1]

Author Topic: Cisco Router Interface Configuration  (Read 1253 times)

shanthala

  • Global Moderator
  • Jr. Member
  • *****
  • Posts: 80
    • View Profile
Cisco Router Interface Configuration
« on: October 26, 2022, 01:13:22 AM »
R1>enable
R1#configure terminal
R1(config)#interface serial 0/0
R1(config-if)#ip address 196.20.32.15 255.255.255.5
R1(config-if)#exit
R1(config)#interface fastethernet 0/0
R1(config-if)#ip address 195.20.32.10 255.255.255.10

By giving “show running-config” command you can view the ip address configured on the interfaces.

Please check out this CCNA Network Simulator Available labs

You may also check this for cisco IOS Supported commands
Logged
Pages: [1]
« previous next »